M.2 (NGFF) extenders....



Picture of M2-A3030-FLEX


M2-A3030-FLEX is a flexible extender for the M.2(NGFF) bus, in A keyed form factor. It is designed for type 2230 and 3030. It features, external power input for voltage margin of the Unit Under Test (UUT); a breakout jumper for USB signal injection; open access to the back of the UUT and an optional Current Sensing Resistor (CSR) for accurate current consumption measurement. The cable length can be ordered from 1" to 8" with an increment of 0.5". The optional CSR value is typically 10 milliohm, 1/2W, 1%. The assembly consist of a gold finger PCB which inserts into a M.2 connector, dual double shielded flexible cables and a M.2 socket connector PCB. The dimension of the gold finger PCB is 22mm W x 30mm L. The socket connector PCB is 40mm W x 52mm L..




Picture of M2-B3024-FLEX


M2-B3042-FLEX is a flexible extender for the M.2(NGFF) bus, in B keyed form factor. It is designed for type 3042. It features, external power input for voltage margin of the Unit Under Test (UUT); a breakout jumper for USB signal injection; open access to the back of the UUT and an optional Current Sensing Resistor (CSR) for accurate current consumption measurement. The cable length can be ordered from 1" to 8" with an increment of 0.5". The optional CSR value is typically 10 milliohm, 1/2W, 1%. The assembly consist of a gold finger PCB which inserts into a M.2 connector, dual double shielded flexible cables and a M.2 socket connector PCB. The dimension of the gold finger PCB is 30mm W x 42mm L. The socket connector PCB is 40mm W x 64.5mm L..





Picture of M2-E3030-FLEX


M2-E3030-FLEX is a flexible extender for the M.2(NGFF) bus, in E keyed form factor. It is designed for type 2230 and 3030. It features, external power input for voltage margin of the Unit Under Test (UUT); a breakout jumper for USB signal injection; open access to the back of the UUT and an optional Current Sensing Resistor (CSR) for accurate current consumption measurement. The cable length can be ordered from 1" to 8" with an increment of 0.5". The optional CSR value is typically 10 milliohm, 1/2W, 1%. The assembly consist of a gold finger PCB which inserts into a M.2 connector, dual double shielded flexible cables and a M.2 socket connector PCB. The dimension of the gold finger PCB is 22mm W x 30mm L. The socket connector PCB is 40mm W x 52mm L..




Picture of M2-M2280-FLEX


M2-M2280-FLEX is a flexible extender for the M.2(NGFF) bus, in M keyed form factor. It is designed for type 2242, 2260 and 2280. It features, external power input for voltage margin of the Unit Under Test (UUT), an open access to the back of the UUT and an optional Current Sensing Resistor (CSR) for accurate current consumption measurement. The cable length can be ordered from 1" to 8" with an increment of 0.5". The optional CSR value is typically 10 milliohm, 1/2W, 1%. The assembly consist of a gold finger PCB which inserts into a M.2 connector, dual double shielded flexible cables and a M.2 socket connector PCB. The dimension of the gold finger PCB is 22mm W x 42, x 60 or x 80mm L. The socket connector PCB is 40mm W x 64, x 82 or x 102mm L for 2242, 2260 or 2280 cards.





PEX4M2M-FLEX is a PCIe-X4 TO M.2 flexible extender. It is keyed to accept all M keyed M.2 cards. It allows direct interface of M.2 cards to PCIe bus for fast access. Two versions are offered, a standard version and an engineering version. The standard version has the necessary signals for the interface. The engineering version allows external voltage input, current measurement via CSR and Crystal oscillator. The flexible cable can be extended up to 8" at GEN 3 speed, or longer for GEN2 and GEN1 speed. The assembly accepts M.2 M keyed cards with 2242, 2260, 2280 and 22110 form factors. User can order the full length or shorter length assembly to fit their needs. All assemblies come with a side clip to hold the bottom assembly to the PCIe-X4 connector. Four pictures are shown below, with and without the SSD card. The SSD card is not included, it is there for illustration only. For a 3" cable assembly, the dimension of the adapter is about 221mm (8.7") L x 60mm (2.36") H.


Picture of PEX4M2M-FLEX-S Picture of PEX4M2M-FLEX-E








Picture of PEX4M2M-FLEX-SD Picture of PEX4M2M-FLEX-ED










[Home] [Sales] [Support] [News] [Product] [FAQ]

(C) Copyright 1998, Adex Electronics, Inc. 3 Watson, Irvine, CA 92618, USA. (T) 949-597-1772; (F) 949-597-1729
Email: adex@adexelec.com; Website: http://www.adexelec.com