PEX1IX, PCI EXPRESS X1 Bus Isolation Extender Specification

PEX1IX is a PCI Express X1 Bus Isolation Extender that allows user to test the PCI Express X1add-on boards quickly without having to power the system down each time. It is especially designed to save valuable labor and time in production testing environment. It is also a great tool for engineers during product development while many changes and testing are required. It provides total power and signal isolation between the motherboard and the board under test. It can be controlled manually by an on-board toggle switch or by external TTL signals. Besides saving time for testing, it also protects the motherboard from damages that can be caused by bad I/O boards under test. The PEX1IX is designed with many years of field experience and real user suggested features. It is built with quality materials and state of the art components. The PEX1IX is made in USA with 90 day warranty.

Product Features:

Total power and signal isolation.
No disturbance to the system bus during bus isolation and reconnection.
Less than 350ps signal delay (isolation buffer + trace delay).
Matched impedance differential signal pairs with identical trace lengths.
Minimum voltage drop.
Single switch operation or external TTL control signals.
Allows external power input for voltage margin test.
Over voltage and over current protection on all three powers.
Pluggable fuse sockets allowing easy replacement of the fuses and allowing current measurement using an ampere meter.
Short circuit sensing on +3.3V, +3.3_AUX and +12V with auto power shut off.
System power and isolated power, green LED indicators.
Reset pulse generation to Unit Under Test (UUT) during power on.
Flashing operating status, red LED indicator.
Dual speaker tones for normal operation and auto shut down mode.
Supports adapter board present_detect.
Supports PCI Express X1 operation.
Extender connector offset allowing insertion of user adapter board with mounting bracket.
Test Points for jumper select or Auto rotating voltage monitoring.
Supports standby operation with 3.3V_AUX and Wake signal bypass.
Supports low cost wearout extender.
Quality multilayer construction.

Product Specifications:

Bus: PCI Express X1 bus.
Power: +3.3V with 4.0 amp slow blow plug fuse; +3.3V_AUX with 0.5 amp slow blow plug fuse; +12V with 1.6 amp slow blow plug fuse; Short circuit sensing logic on +3.3V, +3.3_AUX and +12V.
Control: Single on-board toggle switch or external TTL controls.
Signal Delay: Approximately 350 picosecond (150 picosecond max. through the buffer).
Mounting: Slot bracket..
Environment: 0-60 degree C (operating and storage).
Dimension: Length 5.9 inches, Height 2.3 inches, Width 0.6 inches (Dimension not including the mounting bracket).

[PCIEXP] [Home] [Sales] [Support] [News] [Product] [FAQ]